Transfer your files
Once the device is detected, you will find a disk drive where your videos and
photos are stored.
Push briefly on the memory card to remove it from the
Cambox.
If you have a micro SD card reader on your pad or
smartphone, directly insert the memory card.
If you only have a SD reader on your SD computer, insert the
micro SD in the supplied SD adapter.
Via USB cable
Turn on your Cambox as usual, then pause the record is the
auto record is set on."
The power LED must be solid red"
Plug the USB cable between your Cambox and your computer,
it will automatically detect a new device.
Via the SD card
Activate the Cambox Wifi by pressing the button , the wifi
LED turns on and starts flashing indicating it is ready to be
paired.
Search on your device the list of available Wifi networks and
connect to the network named by default :
Cambox - V4xxx - xxxxxxxx
Enter the Cambox wifi password :
12345678
The Wifi LED turns solid orange indicating that the Cambox is
now connected to your device.
Via Wifi
15
To Next Page
Loading...
