Need help?Do you have a question about the Cambridge Audio Alva Solo and is the answer not in the manual?
Switches the unit between standby and on modes, indicated by LED status.
Describes AC power, signal output, balance control, MM inputs, and ground connection.
Switches the unit between standby and on modes, indicated by LED status.
Describes AC power, signal output, balance control, MM inputs, and ground connection.
Power| maximum power consumption | 10 W |
|---|---|
| standby consumption | <0.5 W |
| mains inlet voltage | 100-240 V AC |
Audio Specifications| gain at 1kHz | 39 dB |
|---|---|
| nominal output | 300 mV |
| sensitivity for nominal output | 3.35 mV |
Audio Performance| equivalent input noise (A-weighted) | ~0.09 uV |
|---|---|
| RIAA curve accuracy | +/- 0.65 dB 30Hz - 20kHz |
| signal to noise ratio grounded inputs ref. 1V output (20Hz - 20kHz BW) | 90 dB |
Electrical Characteristics| THD+N 1kHz (20Hz - 20kHz BW) | <0.0025 % |
|---|---|
| input impedance | 47 kOhm |
| input capacitance | 100 pF |
Weight and Dimensions| dimensions | 48 x 176 x 132 mm |
|---|---|
| dimensions (imperial) | 1.9 x 6.9 x 5.2 " |
| weight | 0.68 kg |
| weight (imperial) | 1.5 lbs |
To Next Page