To Next PageTo Next Page
Need help?Do you have a question about the Cambridge Audio Azur 540A and is the answer not in the manual?
Explains the amplifier's design, circuitry, and performance features, focusing on power supply and driver stages.
Ensures the unit is connected to the correct voltage supply for safe operation and to prevent unit damage.
Details proper wiring for UK plugs, including fuse replacement and wire colour identification for safety.
Covers ventilation, liquid exposure, cable routing, and surface placement for optimal performance and safety.
Discusses running-in period, cleaning procedures, non-user-serviceable parts, and magnetic field interference.
Guides on connecting the AC power cord and loudspeaker wires to terminals A and B, noting impedance.
Explains the function of Pre-Amp Outs for external amplifiers and Tape Monitor inputs for recorders.
Details tape outputs for recording and various line-level inputs like CD, Tuner, DVD, AV, and MD.
Covers connecting Aux/Phono sources and the specific ground connection for turntables.
Illustrates the fundamental connection of the amplifier to a CD player and a pair of loudspeakers.
Shows how to connect the amplifier to a tape recorder for recording and monitoring purposes.
Explains using PRE-OUT sockets with a second amplifier to bi-amp speakers for improved clarity.
Describes enabling a second set of speakers on the rear panel, useful for other rooms.
Covers switching between Standby/On modes and using the headphone socket.
Explains enabling the secondary speaker set and using the Direct mode to bypass tone controls.
Details how to adjust bass, treble, volume levels, and channel balance for optimal sound.
How to select audio sources and use the tape monitor function for recording or playback.
Lists functions controllable via the system remote control for convenience.
Explains intelligent clipping detection and over-temperature monitoring for amplifier and speaker safety.
Covers protection against speaker terminal shorts, DC faults, and overvoltage/overcurrent conditions.
Provides guidance on understanding LED indications and applying remedies for protection system faults.
Addresses problems like no power, no sound, one-channel sound, and unwanted buzz or hum.
Solutions for tape recording issues, weak bass, and diffused stereo imaging.
Guides users to the CAP5 section for issues with standby mode and protection LED flashing.
Details power output, THD, frequency response, S/N ratio, and slew rate for audio quality assessment.
Lists dimensions, weight, max power consumption, and standby power consumption.
Explains the process for claiming warranty service and the required proof of purchase.
Lists conditions that invalidate the warranty and specific types of damage not covered.
Explains the amplifier's design, circuitry, and performance features, focusing on power supply and driver stages.
Ensures the unit is connected to the correct voltage supply for safe operation and to prevent unit damage.
Details proper wiring for UK plugs, including fuse replacement and wire colour identification for safety.
Covers ventilation, liquid exposure, cable routing, and surface placement for optimal performance and safety.
Discusses running-in period, cleaning procedures, non-user-serviceable parts, and magnetic field interference.
Guides on connecting the AC power cord and loudspeaker wires to terminals A and B, noting impedance.
Explains the function of Pre-Amp Outs for external amplifiers and Tape Monitor inputs for recorders.
Details tape outputs for recording and various line-level inputs like CD, Tuner, DVD, AV, and MD.
Covers connecting Aux/Phono sources and the specific ground connection for turntables.
Illustrates the fundamental connection of the amplifier to a CD player and a pair of loudspeakers.
Shows how to connect the amplifier to a tape recorder for recording and monitoring purposes.
Explains using PRE-OUT sockets with a second amplifier to bi-amp speakers for improved clarity.
Describes enabling a second set of speakers on the rear panel, useful for other rooms.
Covers switching between Standby/On modes and using the headphone socket.
Explains enabling the secondary speaker set and using the Direct mode to bypass tone controls.
Details how to adjust bass, treble, volume levels, and channel balance for optimal sound.
How to select audio sources and use the tape monitor function for recording or playback.
Lists functions controllable via the system remote control for convenience.
Explains intelligent clipping detection and over-temperature monitoring for amplifier and speaker safety.
Covers protection against speaker terminal shorts, DC faults, and overvoltage/overcurrent conditions.
Provides guidance on understanding LED indications and applying remedies for protection system faults.
Addresses problems like no power, no sound, one-channel sound, and unwanted buzz or hum.
Solutions for tape recording issues, weak bass, and diffused stereo imaging.
Guides users to the CAP5 section for issues with standby mode and protection LED flashing.
Details power output, THD, frequency response, S/N ratio, and slew rate for audio quality assessment.
Lists dimensions, weight, max power consumption, and standby power consumption.
Explains the process for claiming warranty service and the required proof of purchase.
Lists conditions that invalidate the warranty and specific types of damage not covered.
General| Brand | Cambridge Audio |
|---|---|
| Model | Azur 540A |
| Category | Amplifier |
| Language | English |
