Need help?Do you have a question about the Cambridge Audio AXR100 and is the answer not in the manual?
General| Frequency Response | 5Hz - 50kHz |
|---|---|
| Input Impedance | 47k Ohms |
| Speaker Impedance | 4 - 8 Ohms |
| Tuner | FM/AM |
| Power Consumption (Max) | 550W |
| Power Consumption (Standby) | <0.5W |
| Power Output | 100W (8 Ohms) |
| Signal-to-Noise Ratio | >= 82dB |
| Damping Factor | 100 |
| Inputs | 1 x Phono, 1 x 3.5mm Aux |
| Outputs | 1 x Headphone |
| Bluetooth | Yes |
| DAC | Yes |
| Dimensions | 110 x 430 x 340mm |
| Weight | 8.1kg |
| Total Harmonic Distortion | <0.01% (20Hz - 20kHz) |
Switches the unit between Standby and On modes, with Auto Power Down (APD) function.
Adjusts volume for loudspeakers, Sub-out, and headphones.
Connect speakers via A (main) or B (secondary) terminals, supporting banana plugs.
Adjusts volume, bass, treble, and balance settings.
Connect speakers, ensuring correct polarity and impedance (8 Ohms recommended).
Connects a turntable to the 'Phono' input, utilizing the built-in phono stage.
Guide to connecting a Bluetooth device for audio streaming.
Step-by-step guide to assign radio stations to preset memory slots.
Restore the AXR to factory settings and clear all stored presets.
Check power cord, socket, fuse, and unit's power status.
Verify input source, speaker connections, mute mode, and A/B configuration.
Check aerial, speaker connections, and source input type.
Ensure secure cable connections, especially ground/shield for turntables.
Move unit away from electrical equipment and re-orientate aerial.
Check batteries, obstructions, and correct button usage.
Unit shuts down if it overheats; allow to cool or reduce volume.
Refer to 'Storing Radio Presets' guide for assistance.
Ensure FM/AM antennas are connected and tuner source is selected.
Detailed technical specifications for the AXR85 model.
Detailed technical specifications for the AXR100 model.
AXR is rated for 8 Ohm speakers; 4 or 6 Ohm may cause overheating and damage.
To Next Page
