Need help?Do you have a question about the Cambridge Audio Topaz SR20 and is the answer not in the manual?
General| Bluetooth | No |
|---|---|
| Input Impedance | 47 kΩ |
| Power Amplifier Damping Factor | > 100 |
| Standby Power Consumption | < 0.5 W |
| Subwoofer Output | Yes |
| Phono Input | Yes |
| Digital Inputs | No |
| Frequency Response | 10Hz - 50kHz |
| Inputs | 4 x RCA, 1 x Phono |
| Tone Control Treble | ±10dB @ 10kHz |
| Tone Control Bass | ±10dB @ 100Hz |
| Input Sensitivity | 200 mV |
| THD (unweighted) | <0.01% @ 1kHz, 80% of rated power |
Covers essential safety rules for installation and operation.
Explains symbols like WEEE, CE, RCM, CU-TR, and FCC regulations.
Details warranty coverage, limitations, and service procedures.
Describes connection for digital sources, audio inputs, and outputs.
Covers aerial connections, service port, and speaker outputs.
Explains power controls and AC power connection.
Describes standby, headphone jack, and input source buttons.
Details mode/store, presets, display, speaker A/B, and menu controls.
Covers volume control and front panel MP3 input socket.
Explains power, mute, speaker A/B, stereo/mono, and mode functions.
Details skip, volume, menu, and preset button operations.
Instructions on connecting loudspeakers, including polarity and impedance.
Covers preparing bare wires and a basic connection diagram.
Details using a second set of speakers for another room.
Explains how to connect speakers using the bi-wire configuration.
Guidance on connecting AM loop and FM aerials for optimal reception.
How to select input sources and adjust the listening volume.
Adjusting bass, treble, balance, and tuning FM/AM stations.
Changing tuner regions and storing/recalling radio presets.
Procedure for clearing all stored radio presets.
Resolving problems related to no power or no sound output.
Troubleshooting distorted sound, background noise, and remote control failure.
Information on the unit's thermal protection and cooling.
To Next Page
