Cambridge Audio CXC User Manual

2
4
3
1
6
8 8
7 7
5
9 10
Remote control
The CXC is supplied with a remote control handset that duplicates the
front panel control functions and is also able to control other CX series
products. The supplied AAA batteries must be tted before the remote
control can be used.
The handset buttons function as described in the following paragraphs.
1. BRIGHT
Alters the brightness of the display backlight. There are three levels of
brightness: Bright, Dim and O.
2. STANDBY/ON
Switches the amplier between On and low power ecofriendly Standby
mode.
3. PL AY / 4. PAUS E / 5. STOP
Press the relevant button to play, pause or stop the CD.
6. OPEN/CLOSE
Opens and closes the disc tray.
7. SCAN
Press and hold to scan within the selected track. Hold down for seven
seconds to increase scan speed. Press the right button to fast forward, the
left button to rewind.
8. SKIP
Right Skip – Press to skip forward by one track on the CD.
Left Skip – Press to skip backward by one track on the CD.
9. REPEAT / 10. RANDOM
Read the 'Operating Instructions' section of this manual for information
on the functions of these buttons.
Note: these buttons will function only when the display backlight is
in either 'Bright' or 'Dim' modes. If it is set to 'O', the functions do not
respond.

Cambridge Audio CXC Specifications

General

Type	CD Transport
Disc Compatibility	CD, CD-R, CD-RW
Power Consumption	25W
Standby Power Consumption	< 0.5W
Digital Outputs	S/PDIF Coaxial and Optical
Weight	4.7kg (10.4lbs)
Dimensions	85 x 430 x 315 mm (3.4 x 16.9 x 12.4”)