6
Installation instructions
Last updated: 一月 19, 2023 05:43. Revision #8469
1. Firstly use the included template to mark the position for the mounting hole at the selected location.
Note: We recommend the use of a 75mm (3”) downlight hole saw.
2. When mounting speakers flush to a ceiling or wall, ensure that there is enough depth/clearance within the respective cavity. For the Minx C46 you
will require a minimum clearance of 95mm (3 ¾”).
3. Connect the RED positive (+) and BLACK negative (-) speaker cables to the relevant terminals on the Minx C46. It is important that these are
matched correctly.
To Next Page
Loading...
Need help?
General
