CAME BPT DC-DVC/IP ME User Manual

Came S.p.A.
Via Martiri Della Libertà, 15 Via Cornia, 1/b - 1/c
31030 Dosson di Casier
Treviso - Italy
33079 Sesto al Reghena
Pordenone - Italy
(+39) 0422 4940
(+39) 0422 4941
(+39) 0434 698111
(+39) 0434 698434
www.came.com
Operations on PCS Xip
The device is a constituent part of a system based on the Xip system. For this reason the system structure must be constructed using
the PCS Xip software.
Create the system structure as required: to add IP Entry Panels drag the DVC IP from the list on the right if the entry systems are video,
or DC-IP if they are just audio . Select the devices  added and complete the properties ; these fields are required: ID  and
IP address . Select the push-button panel module , define its layout and set the calls corresponding to each key.
Complete the configuration of the other devices and go on to programming the system.
ETI/miniSER
ETI/miniSER/Domo XIPXIP Multi server
Server
Main DVC IP
DVC IP Block
Main DC IP
DC IP Block
Module
Module
Module
Module
Block IP
ETI/miniSER/Domo XIP local
IP unit
IP Receiver
DC IP
Zone
Concierge
Group of concierges
ETI
Block IP
Sub block IP
Sub block IP
IP 1 unit
IP 2 unit
IP 3 unit
IP 4 unit
DVC IP properties
Name
Block DVC IP
Address
Addressing mode
IP address
Door opening time (s)
Door open alarm time (s)
Door open contact (s)
Aux. lift management
Personalise use of tones
Dusk notied by <None>
No event
Normally open (NA)
SIP User Name
ID
123458
Static
192.168.1.100
2
Off
01002
224.0.0
DVC IP







CAME BPT DC-DVC/IP ME Specifications

General

Brand	CAME BPT
Model	DC-DVC/IP ME
Category	Intercom System
Language	English