Need help?Do you have a question about the CAME BPT LVC/01 and is the answer not in the manual?
General| Brand | CAME BPT |
|---|---|
| Model | LVC/01 |
| Category | Intercom System |
| Language | English |
Instructions for attaching the AGATA VC-V unit to the wall using provided brackets and boxes.
Description of terminal board connections for the AGATA VC-V, including doorbell and BUS line.
Steps to enter programming mode by pressing and holding the Delta key.
Procedure for selecting the melody for calls from the entry panel.
Procedure for programming the melody associated with the doorbell (2 acoustic signals).
Procedure for programming the number of call rings (3 acoustic signals).
Explanation of LED indicators for system status such as Off, On, Slow flashing, and Quick flashing.
Procedure to enter programming mode by pressing the PROG key for at least 3 seconds.
Steps to program the type of entry panel key, indicated by position and backlighting LED.
Procedure to program call keys for internal extensions by using receiver and specific buttons.
Briefly press the PROG key to exit programming mode; the PROG LED will turn off.
Procedure to enter programming mode by pressing the PROG key for at least 3 seconds.
Program call keys for internal extensions using receiver and door lock release/AUX2 buttons.
Briefly press the PROG key to exit programming mode; the PROG LED will turn off.
Entering programming for button types/combinations by pressing the PROG key.
Press the first key of the entry panel until the backlighting LED stops flashing and remains lit.
To Next Page
