EasyManua.ls Logo

CAME BPT PEC IP - Intercommunication Features; Calling and Call Status

CAME BPT PEC IP
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
1 2
2
p. 6 - Manual FB01093-EN v. 1- 04/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.
Select the extension you wish to call;
a free line tone means that the call
has been forwarded.
Three successive beeps mean that
the call cannot go through because
the line is busy.
The called indoor receiver rings.
Press the key of the called
indoor receiver to activated the
communication .
Receivers 1 and 2 are communicating.
If an entry panel calls an indoor
receiver that is talking with another
indoor receiver, the called receiver
will beep and the dial LED will light
up; this sequence is repeated every
five seconds.
The called indoor receiver can
reject the call by pressing the key
.
Intercommunication

Other manuals for CAME BPT PEC IP

Related product manuals