CAME AXI Series - SETTING THE LIMIT SWITCHES; Setting Opening Limit-Switch; Setting Closing Limit-Switch

⚠
❺
❻
❹
󱤎
󱤏
p. 13 - Manual FA01007-EN - v. 1 - 10/2017 - © CAME S.p.A. - "Translated original instructions"
For closing
Close the gate leaf completely and rest it against the
mechanical stop using the slide guide. Fasten the
closing mechanical stop's grub screws
󱤏.
For opening
Reach the gate leaf opening point you want and take
the mechanical stop to rest using the slide guide.
Fasten the closing mechanical stop's grub screws 󱤎.
⚠ DO NOT REMOVE cover 2 without fi rst sliding it.