CAME AXI Series - CONTROL PANEL CONNECTIONS; Wiring for Dual Gearmotor Setup; Wiring for Single Gearmotor Setup

M1 N1 ENC1
M2 N2 ENC2
M
M
M2 N2 ENC2
M
p. 14 - Manual FA01007-EN - v. 1 - 10/2017 - © CAME S.p.A. - "Translated original instructions"
CONNECTIONS TO THE CONTROL PANEL
Gearmotor with encoder (M2) 24 V DC
CONNECTING ONE GEARMOTOR
Gearmotor with encoder (M1) 24 V DC, delayed when opening.
Gearmotor with encoder (M2) 24 V DC, delayed when closing.
CONNECTING TWO GEARMOTORS