Need help?Do you have a question about the CAME AXI Series and is the answer not in the manual?
Instructions for manually releasing the gear motor using a trilobe key and tab.
Instructions for manually locking the gear motor back into position after release.
Identifies common problems with gear motor operation and provides potential causes and fixes.
Crucial safety guidelines for installers to prevent injury and damage during installation.
Defines the product's intended purpose and its classification as 'partly-completed machinery'.
Details essential requirements and precautions for safe and proper installation of the gear motor.
Diagram illustrating main hazard points associated with the gate system and corresponding warning symbols.
Explanation of manual symbols, gear motor features, construction, and primary components.
Specifies applications, gate limits, and physical dimensions for the gear motor.
Detailed technical specifications for AXI20DGS and AXI25DGS models including IP rating, voltage, power, and weight.
Identifies and labels the key components of the gear motor assembly with a numbered diagram.
Lists the primary components required for a standard installation of the gate automation system.
Emphasizes that only skilled and qualified personnel should install the product.
Essential checks to perform before installation, including gate stops, mounting points, and cable protection.
Table detailing recommended cable types and minimum cross-sections based on connection type and length.
Guidance on setting up junction boxes and corrugated tubes for wiring connections from the junction pit.
Instructions on establishing gate bracket fastening points and respecting dimensional quotas for installation.
Steps for fastening the bracket to the gate post, including welding options for metal posts.
Instructions for attaching the bracket to the gate leaf itself.
Procedure for lubricating the bushing and attaching the gearmotor to the post bracket using bolts.
Steps to prepare for setting limit-switch points, including releasing the gearmotor and removing covers.
Detailed steps for safely removing the gearmotor covers, with a caution about sliding cover 1.
Instructions for setting the mechanical stop for the desired gate opening point.
Instructions for setting the mechanical stop for the fully closed gate position.
Wiring diagram and instructions for connecting two gearmotors to the control panel, specifying delayed functions.
Wiring diagram and instructions for connecting a single gearmotor to the control panel.
Guidance on establishing installation quotas (A, B, E) and fastening the gate bracket for outward opening.
Wiring instructions for the gearmotors when configured for outward gate opening.
Procedure for re-fitting the gearmotor covers after completing electrical connections and commissioning.
Information on CAME's commitment to environmental standards and the importance of proper disposal.
Guidelines for disposing of packaging materials as household waste, emphasizing compliance with local laws.
Instructions for disposing of product components, distinguishing between recyclable materials and hazardous pollutants.
To Next Page
General