Need help?Do you have a question about the CAME BPT PEC and is the answer not in the manual?
General| Brand | CAME |
|---|---|
| Model | BPT PEC |
| Category | Intercom System |
| Language | English |
Adjusts ringtone volume and indicates ringtone off status via red LED.
Activates/deactivates communication, indicated by blue LED.
Releases the door lock, with a permanently lit LED indicating the door is open.
Controls Intercom 1 and 2 functions, indicated by blue LEDs.
Controls Auxiliary 1 and 2/Concierge calls, indicated by blue LEDs.
Procedure for answering an incoming call from the entry panel.
Description of the active communication status.
How to open the door during an entry panel call.
Procedure for terminating an active communication session.
How to select and call internal extensions, with busy tone indicators.
Steps to activate communication with a called receiver.
Status of internal receivers 1 and 2 in communication.
Notification of entry panel calls during intercom conversations.
Selecting an extension to transfer an active call.
Called receiver activates communication for call transfer.
Ending entry panel communication and transferring to another receiver.
Ability for a receiving unit to further transfer calls.
Unanswered concierge calls marked by Aux2 LED, notification ceases upon communication.
Pressing Aux2 button sends a request for a call back to the concierge.
Procedure to enter programming mode via button presses.
Selecting melody for entry panel calls and exiting programming.
Selecting melody for front door calls and continuing programming.
Configuring the number of rings for incoming calls (1-6).
To Next Page