Page 16 - Manual FA01639-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Associating internal receivers
In [Programming calls] lift the internal-receiver handset to be confi gured (if present) and press and hold the and
buttons together
The video and the LED crown on the video camera will activate (video versions only).
On the entry panel, press the call button to be associated with the internal receiver.
A tone confi rms that the setting has been stored.
Programming OPEN GATE and GATE STATUS function (latch)*
*Only for internal receivers with OPEN GATE function
Use this function to control and display the gate status (open/closed). The operator status is indicated by the
LED on the
internal receiver switching on or o .
The operator can be controlled via the entry panel auxiliary relay.
The DOOR STATUS function is active by default. It is automatically deactivated when the OPEN GATE and GATE
STATUS function is enabled.
To Next Page
Loading...
Need help?
General
