CAME Wing 40 - Speed and Slow-Down Settings; Pre-Flashing Time Adjustment; Travel and Slow-Down Speeds; Calibration Speed Configuration

F
i
ENTER
> >
ENTER
> >
>...>
0
i
F i2
F
i
F82
I00
F
i
F03
03
02
i2
ENTER
> >
ENTER
> >
ENTER
> >
ENTER
>
>
>...>
>...>
F
i
F82
ENTER
> >
ENTER
> >
>...>
F
i
F03
ENTER
> >
ENTER
>
>
>...>
5
04
i4
i4
03
02
i2
08
04
F
i
F33
>...>
ENTER
ENTER
> >
>
>
03
02
i2
ENGLISH
p.
20
20 - Manual code:
119G3565EN
119G 3 565 E N ver.
2.0
2.0 09/2012 © CAME Cancelli Automatici S.p.A. - The data and information in this manual may be changed at any time and without prior warning.
F 21 (Pre-flashing time): after a closing command, the LED luminous crow connected to the electronic card, flashes
for an adjustable span of time before starting its travel.
the pre-flashing time can be deactivated or adjusted from 1" to 5".
0 = Deactivated (default); 1 = 1 second; 2= 2 seconds; .................. 5 = 5 seconds.
F 28 (Opening travel-speed): setting the opening travel-speed, calculated as a percentage.
40 = 40% of the motor speed (minimum); ....... 100 = 100% of the motor speed (maximum).
F 30 (Opening slow-down speed): setting the opening slow-down-speed, calculated as a percentage.
20 = 20% motor slow-down speed (minimum); ............... 30 = 30% motor slow-down speed (maximum).
F 29 (Closing travel-speed): setting the closing travel-speed, calculated as a percentage.
40 = 40% of the motor speed (minimum); ....... 80 = 80% of the motor speed (maximum).
F 31 (closing slow down speed): setting the speed for closing slow-down, calculated as a percentage.
20 = 20% motor slow-down speed (minimum); ................ 30 = 30% motor slow-down speed (maximum).
F 33 (Calibration speed): setting the speed only during the wing-barrier's calibration phase, calculated as a percentage.
20 = 20% of the motor speed; ...... 30 = 30% of the motor speed.