CAME Wing 40 - Sensitivity and Advanced Feature Settings; Travel and Slow-Down Sensitivity; Slow-Down and Approach Point Settings; Coupled System Configuration

F
i
I00
0 I
I I
ENTER
> >
ENTER
>
>
>...>
F53
F
i
ENTER
> >
ENTER
>
>
>...>
F73
F
i
0 I
I I
ENTER
> >
ENTER
>
>
>...>
F83
F
i
I00
0 I
I I
ENTER
> >
ENTER
>
>
>...>
F43
F
i
ENTER
> >
ENTER
>
>...>
94F
0 I
I I
i
2
3
0
>
54
54
F
i
F93
0 I
i
2
ENTER
> >
ENTER
>
>
>...>
F
i
F04
0 I
i
2
ENTER
> >
ENTER
>
>
>...>
ENGLISH
p.
21
21 - Manual code:
119G3565EN
119G 3 565 E N ver.
2.0
2.0 09/2012 © CAME Cancelli Automatici S.p.A. - The data and information in this manual may be changed at any time and without prior warning
F 35 (Slow-down sensitivity): adjusts the obstacle detection sensitivity when slowing-down.
10 = maximum sensitivity;................. 100 = minimum sensitivity (default).
F 37 (Motor opening slow-down point): adjusts the motor's beginning slow-down point before the opening endstop.
The slow-down starting point is calculated in degrees.
10 = 10°; .................. 45 = 45°.
F 38 (Motor closing slow-down point): adjusts the motor's beginning point of slow-down before the closing endstop.
The slow-down starting point is calculated in degrees.
10 = 10°; .................. 45 = 45°.
F 34 (travel sensitivity): adjusts the obstacle-detection sensitivity during travel.
10 = maximum sensitivity;................. 100 = minimum sensitivity (default).
F 49 (Coupled): enabling two turnstiles to function in coupled or RBM84 modes (access control management) or CRP
(Came Remote Protocol).
0 = Deactivated (default); 1 = Combined; 2 = RBM84; 3 = CRP.
F 39 (Opening approach point): adjusts the starting point of the approaching area of the opening endstop.
The area is calculated in degrees.
0 = 0°; .................. 5 = 5°.
F 40 (Closing approach point): adjusts the starting point of the approaching area of the closing endstop.
The area is calculated in degrees.
0 = 0°; .................. 5 = 5°.