Cameo CONTROL 54 - Operating Modes and Effects; Colour Effects (Fade, Jump, Auto); Manual Control Mode

6
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
8 9 10 11
8
COLOUR FADE
Colour fade effect with adjustable speed Select a DMX spotlight by pressing the FIXTURE button, and then click the one-touch button (1 to 9)
associated with the desired device. Press COLOUR FADE (LED indicator above the button lights up) and set the spotlight brightness using the
channel fader 3 MASTER and the speed of the colour fade effect using fader 2 FADE.
9
COLOUR JUMP
Colour jump effect with adjustable speed. Select a DMX spotlight by pressing the FIXTURE button, and then click the one-touch button (1 to
9) associated with the desired device. Press COLOUR JUMP (LED indicator above the button lights up) and set the spotlight brightness using
the channel fader 3 MASTER and the speed of the colour jump effect using fader 1 SPEED.
10
AUTO
Combination of Colour Fade and Colour Jump effects with adjustable speed. Select a DMX spotlight by pressing the FIXTURE button, and
then click the one-touch button (1 to 9) associated with the desired device. Press AUTO (LED indicator above the button lights up) and set
the spotlight brightness using the channel fader 3 MASTER, the speed of the colour fade effect using fader 2 FADE, and the speed of the
colour jump effect using fader 1 SPEED.
11
MANUAL
The manual control of DMX devices is done using the channel faders (e.g. colour mixing). Select a DMX device by pressing the FIXTURE
button, and then click the one-touch button (1 to 9) associated with the desired device. Press MANUAL (LED indicator above the button lights
up) and make the desired adjustments using the channel faders 1 to 6.