Need help?Do you have a question about the Cameron NuFlo MC-II and is the answer not in the manual?
General| Brand | Cameron |
|---|---|
| Model | NuFlo MC-II |
| Category | Measuring Instruments |
| Language | English |
Explains safety symbols (Warning, Caution) and terms used in the manual.
General mounting considerations for the MC-II Flow Analyzer.
Step-by-step instructions for mounting the MC-II directly onto a flowmeter.
Instructions for mounting the MC-II on a 2-in. pipe using a remote mounting kit.
Guidance on applying labels for different units of measure to the front panel.
Details keypad functions in Run Mode, including Save/Store Data.
How to adjust the decimal point for volume readouts in Run Mode.
Instructions on how to view the current calibration factor.
How to adjust LCD contrast for readability.
Procedure to reset the volume total to zero.
Explains the auto-return to Run Mode from Calibrate Mode.
How to correct an overrun error by changing the flow rate unit.
Steps to enable or disable the password-protected security feature.
Procedure to obtain a one-time bypass code if the password is forgotten.
Tips for re-entering settings and navigating menus efficiently.
Steps to select the desired volume unit (e.g., bbl, gal, m³).
How to input the meter's calibration factor.
Instructions for selecting the flow rate unit (e.g., bpd, gpm).
Managing pulse output and password security settings during calibration.
Guidance on selecting a scale factor for pulse output.
Steps to select, deselect, or bypass the password security feature.
How to calculate the divisor for user-defined units.
Step-by-step guide for entering the calculated divisor into the MC-II.
Selecting the rate unit for user-defined volume.
Instructions to disable pulse output.
Steps to disable password security.
How to bypass the preset total setting.
Formula and variables for calculating the gas measurement divisor.
Example calculation and rounding of the divisor for gas measurement.
When and why to recalibrate the MC-II for accuracy.
Step-by-step instructions for replacing the MC-II's battery.
Source and form of the pulse input signal.
Types of pulse outputs and relay voltage matching.
Technical specifications for the pulse output circuit.
Steps for installing the pulse output circuit.
Explanation of scale factors for pulse output.
Steps to enable and configure the pulse output feature.
Source and form of the pulse input signal for intrinsically safe option.
Types of pulse outputs for intrinsically safe option.
Technical specs for the intrinsically safe pulse output circuit.
Steps for installing the intrinsically safe pulse output circuit.
Explanation of scale factors for intrinsically safe pulse output.
Steps to enable and configure the intrinsically safe pulse output.
Guidelines for the proper disposal of lithium batteries.
Regulations and warnings for shipping lithium batteries.
To Next Page
