Need help?Do you have a question about the Cameron Scanner 2000 microEFM and is the answer not in the manual?
General| Brand | Cameron |
|---|---|
| Model | Scanner 2000 microEFM |
| Category | Measuring Instruments |
| Language | English |
Explains symbols and terms used throughout the manual.
Provides contact details for technical assistance.
Outlines the standard features of the Scanner 2000 microEFM.
Lists available hardware options for customizing the instrument.
Details the functions of the ModWorX Pro interface software.
Outlines installation requirements for hazardous area environments.
Lists safety precautions related to pressure connections.
Describes various methods for mounting the Scanner 2000 unit.
Installation guidelines for measuring natural gas with a DP meter.
Installation guidelines for measuring natural gas with a turbine meter.
Installation guidelines for measuring steam with a DP meter.
Installation guidelines for measuring liquid with a DP meter.
Details on making field wiring connections to the instrument.
Instructions for connecting the power supply.
Wiring instructions for various inputs.
How to configure the device using its keypad.
Steps to enter the Modbus slave address.
Steps to set the communication baud rate.
How to set the instrument's date and time.
Procedure for replacing the lithium battery pack.
Procedure for replacing the main circuit board assembly.
Procedure for replacing the keypad.
Procedure for replacing the Multi-Variable Transmitter.
Describes the function and availability of the control switch.
Details different types of RTD assemblies.
Information on communications adapters for connectivity.
Details the features and installation of the I/O expansion board.
General overview of Fieldbus capabilities.
Hardware options for Fieldbus devices.
Specifications specific to Fieldbus devices.
Recommended equipment for Fieldbus network installation.
Field wiring procedures for Fieldbus devices.
Describes basic wiring for a standard Scanner 2000.
How to configure basic parameters for Fieldbus devices.
Steps for configuring Fieldbus parameters.
Methods for identifying the Scanner 2000 on a Fieldbus network.
Introduction to the Modbus protocol used by the Scanner 2000.
Lists Modbus commands supported by the device.
Describes the data types used in Modbus communication.
Overview of Modbus registers and their access types.
Details on control registers for implementing functions.
Registers related to system configuration.
To Next Page
