Need help?Do you have a question about the Cameron NUFLO EZ-IN Series and is the answer not in the manual?
General| Accuracy | ±1% of reading |
|---|---|
| Operating Temperature | -40°F to 250°F (-40°C to 121°C) |
| Materials of Construction | Stainless steel |
| End Connections | NPT, BSP |
| Output Signal | pulse |
| Applications | Oil and gas |
| Sizes | 1 in, 2 in |
Key safety and operational guidelines for installing the flowmeter.
Detailed instructions for correctly installing the turbine flowmeter into a pipeline.
Detailed steps for safely detaching the flowmeter from the pipeline.
Instructions for taking apart the hex-body type turbine flowmeter.
Steps to correctly reassemble the hex-body type turbine flowmeter.
Instructions for taking apart the round-body type turbine flowmeter.
Steps to correctly reassemble the round-body type turbine flowmeter.
Procedures for reinstalling the flowmeter back into the pipeline after maintenance.
Operational temperature and pressure limits for different flange classifications.
Linear flow ranges for various meter bore sizes based on water.
To Next Page
