Important Safety Information
Symbols and Terms Used in this Manual
!
WARNING: This symbol identies information about practices or circumstances that can lead to per-
sonal injury or death, property damage, or economic loss.
CAUTION: Indicates actions or procedures which if not performed correctly may lead to personal
injury or incorrect function of the instrument or connected equipment.
Important: Indicates actions or procedures which may affect instrument operation or may lead to an
instrument response which is not planned.
Symbols Marked on Equipment
Attention! Refer to manual Protective (earth) ground
Technical Support Contact Information
Cameron
Measurement Systems Division
14450 John F. Kennedy Blvd.
Houston, TX 77032
Phone: 1-800-654-3760; 281-582-9500
Fax: 281-582-9599
NuFlo and ModWorX are trademarks of Cameron International Corporation (“Cameron”).
Scanner and Barton are registered trademarks of Cameron.
Modbus is a registered trademark of the Modbus Organization, Inc.
Flow-Cal is a registered trademark of Flow-Cal, Inc.
PGAS is a registered trademark of Quorum Business Solutions, Inc.
Foundation is a trademark of the Fieldbus Foundation.
Windows is a registered trademark of Microsoft Corporation.
Acrobat Reader is a registered trademark of Adobe Systems Incorporated.
© 2011 Cameron International Corporation (“Cameron”). All information contained in this publication is con-
dential and proprietary property of Cameron. Any reproduction or use of these instructions, drawings, or
photographs without the express written permission of an ofcer of Cameron is forbidden.
All Rights Reserved.
Printed in the United States of America.
Manual No. 9A-30165023, Rev. 10
December 2011
To Next Page
Loading...
Need help?
General
