Camozzi PME Series - User Manual

Operation and maintenance instructions
Series PME proportional pressure regulator
5000044242
Ver. 01
1
Operation and maintenance instructions for Series PME Electronic proportional
regulator
The products are designed and manufactured in conformity with the following directives:
- 2014/30/UE “Electromagnetic compatibility”
They also comply partially or totally with regard to the applicable parts of the following standards:
- EN 61000-6-2:2005 Electromagnetic compatibility (EMC) — Part 6-2:
Generic standards - Immunity for industrial environments
- EN 61000-6-4:2007 Electromagnetic compatibility (EMC) — Part 6-4: Generic standards -
Emissions for industrial environments
- UL 61010-1: Safety requirements for electrical equipment for measurement, control and
laboratory use Part 1: General requirements and the following technical standards
and to the following technical standards:
- EN ISO 4414:2010 Pneumatics - General rules and safety requirements for systems and their
components.
For more information regarding the declarations of conformity, see the Certifications section
on the website http://catalogue.camozzi.com.
Made in Italy

Camozzi PME Series Specifications

General

Brand	Camozzi
Model	PME Series
Category	Controller
Language	English

Summary

Product Identification

Production Date Conversion Table

Table used to convert the production date based on week and year codes.

Introduction

General Recommendations

Product Description

Pneumatic Symbols

General Characteristics and Conditions of Use

Electrical and Pneumatic Circuit

Product Storage and Transport

Installation and Start-up

Digital Output

NFCamApp

Information

Details displayed about the selected Series PME device via NFCamApp.

Configurator

Description of the NFCamApp configurator parameters for Series PME regulators.

Use

Limitations on Use

Maintenance

Environmental Notes

Contacts