EasyManua.ls Logo

Camozzi PME Series - Page 11

Camozzi PME Series
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation and maintenance instructions
Series PME proportional pressure regulator
5000044242
Ver. 01
11
FLOW CHARTS SIZE 1 Manifold version (1/4G)
Typical curve of flow rate from 0,5 to 6 bar
P = Regulated outlet pressure and exhaust pressure
Q = Flow
% = Percentage of the command signal
Inlet pressure 7 bar
Typical curve of flow rate from 0,5 to 7 bar
P = Regulated outlet pressure and exhaust pressure
Q = Flow
% = Percentage of the command signal
Inlet pressure 8 bar
Typical curve of flow rate from 1 to 9 bar
P = Regulated outlet pressure and exhaust pressure
Q = Flow
% = Percentage of the command signal
Inlet pressure 10 bar
DECAY FACTOR
N° = number of regulators in manifold configuration
D(%) = relative percentage decay of the maximum flow rate
Note: the air inlet is only from one side, in case it should be on the
right and on the left, only consider the positions as from 1 ÷ 3..

Related product manuals