EasyManua.ls Logo

CAMPARK BM10 - Troubleshooting Common Issues; Audio and Connectivity Problems; Range and Power Issues

CAMPARK BM10
10 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Trouble shooting :
1. The monitor is too loud .
The camera uses a high sensitivity mic phone to pick up tiny sound from
the baby, when the sound from the monitor is too loud, you can press the
button to lower the volume.
2. Howling from the monitor when the camera is nearby .
Itʼs caused by Acoustic feedback, since the audio signal received by
MIC with the voice around camera mixed and emitted, the receiver will
make
greater invoice. Again and again, Howling formed. You can lower
the
loudspeaker volume or put receiver away from camera.
3. Whats the range of the wireless transmission.
Normally the transmission range is up to 200~300 meters in open area
without electromagnetic interference.
However, obstructions like walls / doors / glasses / trees will
significantly aect the transmission range.
4 . Can I connect multiple cameras with one monitor.
Yes, a single monitor can connect up to 4 cameras , you can follow the
instructions to connect them.
5. The monitor wont power on.
Please check the monitor battery rst, you can use the included power
adapter to charge the monitor
.
6. The image and voice transmission is not smooth, the video
or audio jams.
The wireless transmission can be aected by obstructions like walls
/
doors / glasses / trees, also other high power devices like
microwave
oven or wireless router have certain inuence on the
transmission.

Related product manuals