CAMPARK BM10 - Common Operations Guide; Monitor Volume and Brightness; Camera Settings and Temperature Display; White Light LED Control

5
Common Operations:
1: Monitor volume adjustment
Press and
button in main interface/Live view to adjust the volume of
the monitor.
2：Monitor brightness adjustment
Press left/right button in main interface/Live view to adjust the
brightness of the monitor.
3: Camera brightness adjustment
In main interface press menu /zoom in button to access the setup
menu, select “Brightness” option by
pressing
and
button after it
turns red and highlighted, use left/right button to adjust brightness
level. After adjustment, select “Exit Menu” option, press OK button to
exit setup menu.
4: Temperature display unit setting
In main interface press menu /zoom in button to access the setup menu,
select “Temperature” option by pressing and button after
it turns red andhighlighted. Press right/left key to choose ℃ or ℉. After
adjustment, select “Exit Menu” press OK button to exit.
5: White light LED ON-OFF
In main interface press menu /zoom in button to access the setup
menu, select “Light LED” option by
pressing
and button after it
turns red and highlighted. Press right/left key to turn ON/OFF the white
LED on the camera. After adjustment, select “Exit Menu” press OK
button to exit.
Notice: The LED can be operated on the monitor only when the camera
and the monitor are connected.