CAMPARK BM20 - Loop Display; Channel Selection; Delete Camera; Add Camera

Loop Display:
PressUPandDOWNtoselectloop,pressOKtoturnON/OFF
loopdisplayfunction.
Whentherearemultiplecamerasconnected,withloopdisplayfunctionon,
thecamerawillloopdisplayallconnectedcameras.
OK
Channel Selection
PressUPandDOWNtoselectachannelandpressOK
buttontodisplaytheselectedcamera.
OK
Delete Camera
PressUPandDOWNtoselectachannelandpressOK
buttontodisplaytheselectedcamera.
OK
Add Camera
PressUPandDOWNtoselectachanneltoconnectanewcamera.
ForExample:
CameraAhasalreadybeenconnectedtothemonitoronChannel1.To
connectCameraBtoChannel2,shortpressMENUbuttonInLive
ViewmodetoenterSetupMenu,presstheleftandRightbutton
toselectCamerasetup.PressUPandDOWNtoselect
AddCamera,pressOKbuttontoconfirm.
1
2
M
OK
13