B. How to use memory card.
1. The camera uses Micro SD card as storage, capacity up to
64GB supported, and to ensure normal function, please use
high speed memory card, Class 10 or above cards are
recommended.
2. Before using the camera please insert the memory card first,
and format the memory card in setting menu before using.
3. This camera does not support Hot swap,turn off the camera
before inserting or taking out the memory card.
4. Insert the memory card as indicated by the icon into the slot
until the card totally inside.To remove the memory card,
gently press the edge of the memory card until it pops out.
C. Power ON / OFF
1. Power on: Keep pressing the Power key for 3s till the
screen is on.
2. Power off: keep pressing the camera for 3s to power off
How to start :
A. Charge the detachable Li-ion battery
1. Use a 5V/2A standard USB adapter to charge the camera via
USB cable, or connect the camera to your computer to charge
the camera.
2. When charging is in progress, the charging indicator will be on,
and the indicator will turn off after fully charging.
3.Normally it will take about 2~3 hours to fully charge the camera.
5
To Next Page
Loading...