Campbell Hausfeld CHN10401 - User Manual

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
For parts, product & service information
visit www.chpower.com
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
IN722002AV 4/10
See Warranty on page 10 for important information about commercial use of this product.
© 2010 Campbell Hausfeld/Scott Fetzer
2-in-1 Nailer / Stapler
Figure 1 - Models CHN10401 and CHN10402
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
NOTE: Information that requires special
attention.
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates
an imminently
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
Warning indicates
a potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
Locate model and date code on
tool and record below:
Model No. ______________________
Date Code ______________________
Retain these numbers
for future reference.
Table of Contents
Description . . . . . . . . . . . . . . . . . . . . . .1
Unpacking . . . . . . . . . . . . . . . . . . . . . . .1
Safety Guidelines . . . . . . . . . . . . . . . . .1
Important Safety Instructions . . . . . . .2
Tool Components and
Specifications. . . . . . . . . . . . . . . . . . . . .2
Operating the Tool . . . . . . . . . . . . . . . .5
Maintenance . . . . . . . . . . . . . . . . . . . . .7
Fasteners . . . . . . . . . . . . . . . . . . . . . . . .8
Troubleshooting Chart . . . . . . . . . . . . .9
Warranty . . . . . . . . . . . . . . . . . . . . . . .10
Description
This tool is designed for decorative trim,
molding, window casings, furniture
trim, picture frame assembly, cabinetry,
casebacks, and crafts. Features include:
convenient top loading magazine
which holds up to 100 brads or staples,
adjustable depth control, adjustable
exhaust, quick clear nose.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.
READ & FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
DO NOT DISCARD
Operating Instructions CHN10401, CHN10402

Summary

Description

Safety Guidelines

Information to help recognize important safety instructions and prevent equipment problems.

Important Safety Instructions

Tool Use and Care

Air Source and Hookup

Air Source Requirements

Specifications for air source, including pressure limits and gas types for safe operation.

Operating the Tool

Lubrication

Procedure for lubricating the tool before use to ensure proper function and longevity.

Checking Work Contact Element (WCE)

Procedure to check the Work Contact Element (WCE) for proper function before each use.

Tool Operation Details

Loading and Unloading Fasteners

Step-by-step instructions for loading and unloading fasteners from the tool's magazine.

Adjusting Fastener Penetration

How to adjust the depth of drive feature for consistent fastener penetration.

Clearing a Jam from the Tool

Procedure for safely clearing jammed fasteners from the tool, including necessary precautions.

Maintenance

Troubleshooting Chart

Limited Warranty

Warranty Duration and Coverage

Details on the warranty period, what the warranty covers, and limitations.

Exclusions from Warranty

Campbell Hausfeld CHN10401 Specifications

General

Brand	Campbell Hausfeld
Model	CHN10401
Category	Nail Gun
Language	English