Campbell Hausfeld IronForce IFN00300 User Manual

1-1/4 inch Brad Nailer
Table of Contents
Descripion . . . . . . . . . . . . . . . . . . . . . . .1
Unpacking . . . . . . . . . . . . . . . . . . . . . . .1
Safety Guidelines . . . . . . . . . . . . . . . . .1
Important Safety Information . . . . . . .1
Tool Components and
Specifications. . . . . . . . . . . . . . . . . . . . .2
Operating Instructions . . . . . . . . . . . . .4
Lubrication . . . . . . . . . . . . . . . . . . . . .4
Recommended Hookup. . . . . . . . . . .4
Operational Mode . . . . . . . . . . . . . . .5
Single Sequential Mode . . . . . . . . . .5
Operating A Sequential Trip Tool . . .5
Loading/Unloading The Tool. . . . . . .5
Adjusting the Fastener Penetration 6
Adjusting Direction of Exhaust. . . . .6
Clearing A Jam From The Tool . . . . .6
User-Maintenance Instructions . . . . . .6
Fasteners . . . . . . . . . . . . . . . . . . . . . . . .7
Interchange Information . . . . . . . . . . .7
Troubleshooting Chart . . . . . . . . . . . . .8
Warranty . . . . . . . . . . . . . . . . . . . . . . .10
Description
This nailer is designed for decorative
trim, molding, window casings,
furniture trim and picture frame
assembly. Features include: adjustable
exhaust, single sequential trigger, quick
clear nose, and an adjustable depth of
drive mechanism.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.
Model IFN00300
CALIFORNIA PROPOSITION 65
This product or
its power cord may
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates an
imminently
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
Warning indicates a
potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
NOTE: Information that requires special
attention.
Important Safety Instructions
INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS
When using tools,
basic precautions
should always be followed, including
the following:
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
IN725200AV 3/08
See Warranty on page 10 for important information about commercial use of this product.
Operating Instructions IFN00300
Locate model and date code on
tool and record below:
Model No.: _____________________
Date Code: _____________________
Retain these numbers for
future reference.
For parts, product & service information
visit www.chpower.com
© 2008 Campbell Hausfeld/Scott Fetzer
Campbell Hausfeld Tools meet or exceed Industries’ Standards as set forth by the American National Standard
Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002.

Campbell Hausfeld IronForce IFN00300 Specifications

General

Brand	Campbell Hausfeld
Model	IronForce IFN00300
Category	Nail Gun
Language	English

Summary

Operating Instructions Overview

Safety Guidelines

General safety guidelines and symbols indicating hazard levels for safe operation.

Product Description

Overview of the 1-1/4 inch Brad Nailer and its key features.

Unpacking and Initial Inspection

Instructions for unpacking the unit and checking for transit damage.

Important Safety Instructions

General Safety Rules

General precautions to reduce risks of electric shock, fire, and injury to persons.

Work Area Safety

Guidelines for maintaining a safe and well-lit work area free from hazards.

Personal Safety Precautions

Essential personal safety measures, including alertness, dress code, and eye protection.

Tool Components and Specifications

Tool Use and Care

General Tool Use Guidelines

Proper techniques for securing workpieces, using the correct tool, and handling.

Safety Warnings for Tool Operation

Critical warnings related to trigger use, air source, and modifications for preventing injury.

Service, Air Source, and Lubrication

Service and Maintenance Requirements

Guidelines for professional service, replacement parts, and lubricants.

Air Source Requirements

Specifications for air compressors, hoses, and proper air pressure.

Lubrication Procedures

Instructions for lubricating the tool before and during use.

Recommended Hookup

Illustration and explanation of the recommended air connection setup.

Operating Instructions: Modes and Loading

Single Sequential Mode

Explanation of the single sequential trigger operation mode.

Operating a Sequential Trip Tool

Steps and safety checks for operating the sequential trip mechanism.

Loading and Unloading the Tool

Procedures for safely loading and unloading fasteners into the magazine.

Operating Instructions: Adjustments and Clearing

Adjusting Fastener Penetration

How to adjust the depth of drive for fasteners.

Adjusting Exhaust Direction

How to change the direction of the exhaust deflector.

Clearing a Jam from the Tool

Step-by-step instructions for clearing jammed fasteners.

User-Maintenance Instructions

Technical Service and Support

Information on contacting technical service for questions or manual copies.

Fastener and Replacement Parts

Guidance on using genuine fasteners and ordering replacement parts.

Tool Repair Guidelines

Requirements for qualified personnel and genuine parts for tool repair.

Storage Recommendations

Proper storage conditions for the tool.

Fasteners and Interchangeability

Fastener Specifications

Details on available Campbell Hausfeld finishing fasteners, including size and collation.

Interchange Information

List of compatible brad nailers for interchangeable fasteners.

Troubleshooting Chart

Limited Warranty Information

Warranty Duration and Coverage

Details on the one-year warranty period and coverage for defects.

Exclusions from Warranty

List of conditions and situations not covered by the limited warranty.

Purchaser Responsibilities

Obligations of the purchaser, including proof of purchase and proper use.