Campbell Hausfeld FP1995 Series - User Manual

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions and Parts List FP1995 Series
IN640200AV 10/13© 2013 Campbell Hausfeld/Scott Fetzer
Description
Oilless compressors are designed for
do-it-yourselfers with a variety of
home and automotive jobs. These units
operate without oil. Compressed air
from this unit will contain moisture.
Install a water filter or air dryer if
application requires dry air.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service. In case of
questions, damaged or missing parts,
please call 1-800-543-6400 for customer
assistance.
Have the date code, model number,
and parts list (with missing parts circled)
before calling.
DO NOT RETURN
THE PRODUCT TO
THE RETAILER!
Do not operate
unit if damaged
during shipping, handling or use.
Damage may result in bursting and
cause injury or property damage.
Warning indicates
a potentially
hazardous situation which, if not
avoided, COULD result in death
or serious injury.
Caution indicates
a potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed,
may cause damage to equipment.
NOTE: Information that requires special
attention.
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates
an imminently
hazardous situation which, if not
avoided, WILL result in death or
serious injury.
Record the Model No., Serial No. and date of purchase located on the base
below the pump in the space below.
Serial No. _____________________________________________________
Date of purchase _______________________________
Retain these numbers for future reference.
STOP!
Oilless
Compressor
REGISTER YOUR PRODUCT ONLINE NOW! http://www.campbellhausfeld.com
For parts, product & service information
visit www.campbellhausfeld.com
Specifications
Max Pressure 110 psi
Air Delivery
@ 90 psi 0.39 SCFM
Air Delivery
@ 40 psi 0.51 SCFM
Voltage 120 Volts, 60 Hz
2 Amps
READ & FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS • DO NOT DISCARD

Campbell Hausfeld FP1995 Series Specifications

General

Tank Capacity	6 Gallon
Power Source	Electric
Horsepower	0.8 HP (Peak)
Weight	48 lbs
Pump Type	Oil-Free
Voltage	120V
Tank Size	6 gallons

Summary

Product Description

Unpacking Instructions

Compressor Specifications

Safety Guidelines Overview

Safety Symbol Definitions

Explanation of DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.

General Safety Information

California Proposition 65 Warning

Notice about chemicals in the product known to cause cancer and reproductive harm.

Dust Creation Warning

Warning about potential health risks from dust generated during material processing.

General Operating Safety Rules

Essential safety practices for operating the compressor safely, including personal protection.

Spraying Safety Precautions

Specific safety guidelines to follow when using the compressor during spraying operations.

Breathable Air Warning

Critical warning regarding air quality for human consumption without proper filtration.

Component Identification and Function

ON;OFF Switch and Pressure Switch

Description of the power control and automatic pressure regulation switch.

Regulator and Pressure Gauges

Explanation of air pressure control and monitoring instruments on the compressor.

Safety Valve, Handle, and Drain Valve

Details on safety release, transport handle, and moisture drainage features.

Motor Reset Function

Information on the thermal overload protector and its reset procedure.

Installation and Setup Procedures

Installation Location Requirements

Guidelines for choosing a suitable operating location for the compressor.

Grounding Instructions

Critical safety steps for proper electrical grounding of the compressor.

Operational Procedures

First Start-Up Break-In

Procedure for preparing the compressor before its first use.

Before Each Start-Up Checks

Routine checks and preparations before operating the compressor.

Compressor Operation Cycling

Understanding how the compressor automatically starts and stops based on pressure.

Maintenance and Care

Moisture in Compressed Air

Explanation of moisture formation in compressed air and its potential impact.

Safety Valve Testing and Maintenance

Procedure for testing and ensuring the safety valve's functionality.

Drain Tank and Unit Cleaning

Instructions for draining moisture and cleaning the compressor unit.

Lubrication and Overload Protector

Information on lubrication needs and the thermal overload protection.

Storage and Technical Service

End of Operation and Storage

Steps for safely shutting down and storing the compressor.

Technical Service Information

Contact information for assistance with operation or repair.

Maintenance Schedule

Troubleshooting Guide

Compressor Will Not Run

Diagnosing why the compressor fails to start.

Overload Protector Tripping

Resolving frequent motor shutdowns due to overload.

Pressure Drop and Low Output Issues

Troubleshooting tank pressure loss and reduced air output.

Moisture and Safety Valve Problems

Addressing excessive moisture and unexpected safety valve activation.

Limited Warranty Information

Warranty Coverage and Exclusions

Details on what is covered and not covered by the product warranty.

Purchaser Responsibilities

Obligations of the purchaser for warranty claims and maintenance.