Campbell Hausfeld FP2095 User Manual

© 2009 Campbell Hausfeld/Scott Fetzer
R
e
p
l
a
c
e
m
e
n
t
P
a
r
t
s
Q
u
i
c
k
C
o
n
n
e
c
t
R
e
f
e
r
e
n
c
e
C
h
a
r
t
1
Close pressure regulator,
Turn ON compressor and
Allow tank to reach
maximum pressure.
2
Attach air hose
to regulator outlet.
Adjust regulator
knob so outlet
pressure is between
60 psi and 100 psi.
Use 90 psi to
100 psi for
nailing or
stapling.
2 Gallon Air
Compressor Kit
FP2095
Setup Like a Pro
Easy Setup Guide
Projects are easier with
Campbell Hausfeld products.
Thank you for deciding to purchase a Campbell
Hausfeld product. We are dedicated to providing
tools to our customer that help them to complete
their projects Like a Pro.
IN629401AV 7/09
Visit us at chpower.com
Setup Like a Pro FP2095 — Oilless Compressor
3
When using the Nailer / Stapler,
Place 4 to 5 drops of nailer
oil in air inlet. Tip nailer back
to reduce spillage.
Recoil Air Hose
Male Plug
Male Plug Tire Chuck
Adapter
Inflation Nozzle
Inflation Nozzle
Inflation Needle
Brad Nailer / Stapler
Compressor
Regulator Outlet
Pressure Regulator Knob
ON / OFF Switch
Female Coupler
OIL: For
use with
Brad Nailer/
Stapler.
Use a wrench to
tighten threads when
connecting hose,
coupler, and plug.
4
Pull back collar on
coupler. Insert nailer plug
or plug with attached inflation
accessory.
Recoil Air Hose
Part Number: MP268100AV
Female Coupler
Part Number: MP288300AV
Tire Chuck, (2) Inflation Nozzles, Inflation Needle,
Inflation Adapter, and Male Plugs
Part Number: FP204008AV
Crown Staples
Part Number: FN258K00AV
Nailer Oil
Part Number: ST127012AV
3 mm Allen Wrench 4 mm Allen Wrench
Brad Nails
Part Number: FB180050AV
Brad Nailer / Stapler
Part Number: SB504099AV
IMPORTANT: Drain tank after each use. After tank is drained,
tighten drain valve completely to help eliminate air leaks.

Campbell Hausfeld FP2095 Specifications

General

Max Pressure	125 PSI
Power Source	Electric
Voltage	120 V
Motor Type	Induction
Pump Type	Oil-Free

Summary

Oilless Compressor Setup Steps

Step 1: Initial Compressor Pressure

Close the pressure regulator, turn on the compressor, and allow the tank to reach maximum pressure.

Step 2: Air Hose Connection and Pressure Adjustment

Connect the air hose to the regulator outlet and set the pressure between 60-100 psi for optimal use.

Step 3: Nailer/Stapler Lubrication

Add 4-5 drops of nailer oil to the air inlet of the tool to prevent spillage during operation.

Step 4: Connecting Air Tools

Pull back the coupler collar and insert the nailer plug or attachment securely into the connection.

Quick Connect Reference Chart

Component Connection Guide

A visual guide illustrating compressor connections, including plugs, adapters, nozzles, and tire chucks.

Important Maintenance and Parts

Tank Draining Procedure

Drain the compressor tank after each use and tighten the drain valve completely to prevent air leaks.

Available Replacement Parts

Lists essential replacement parts for the compressor kit, including nailers, staples, oil, wrenches, and hoses.