EasyManua.ls Logo

Campbell Hausfeld FP202800 User Manual

Campbell Hausfeld FP202800
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions and Parts List FP202800, FP202900
IN614206AV 7/09© 2009 Campbell Hausfeld/Scott Fetzer For parts, product & service information,
visit www.chpower.com
Description
Oilless compressors are designed for
do-it-yourselfers with a variety of
home and automotive jobs. These
units operate without oil. Compressed
air from this unit will contain moisture.
Install a water filter or air dryer if
application requires dry air.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make
sure to tighten fittings, bolts, etc.,
before putting unit into service. In
case of questions, damaged or missing
parts, please call 1-800-543-6400 for
customer assistance.
Have the date code, model number,
and parts list (with missing parts
circled) before calling.
DO NOT RETURN
THE PRODUCT TO
THE RETAILER!
Do not operate
unit if damaged
during shipping, handling or use.
Damage may result in bursting and
cause injury or property damage.
READ & FOLLOW ALL
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
DO NOT DISCARD
Notice indicates
important
information, that if not followed,
may cause damage to equipment.
NOTE: Information that requires
special attention.
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe
the following symbols.
Danger indicates
an imminently
hazardous situation which, if not
avoided, WILL result in death or
serious injury.
Warning indicates
a potentially
hazardous situation which, if not
avoided, COULD result in death
or serious injury.
Caution indicates
a potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Breathable Air Warning
This compressor/pump is not
equipped and should not
be used “as is” to supply
breathing quality air. For
any application of air for
human consumption, the air
compressor / pump will need to
be fitted with suitable in-line
safety and alarm equipment.
This additional equipment is
necessary to properly filter
and purify the air to meet
minimal specifications for Grade
D breathing as described in
Compressed Gas Association
Commodity Specification G
7.1 - 1966, OSHA 29 CFR 1910.
134, and/or Canadian Standards
Associations (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor
is used for the purpose of
breathing air application
and proper in-line safety
and alarm equipment is not
simultaneously used, existing
warranties shall be voided, and
Campbell Hausfeld disclaims any
liability whatsoever for any loss,
personal injury or damage.
Record the Model No., Serial No.
and date of purchase located on the
base below the pump in the space
below.
Model No. FP202800, FP202900
Serial No. ___________________
Date of purchase ____________
Retain these numbers for
future reference.
STOP!
Oilless
Compressors

Other manuals for Campbell Hausfeld FP202800

Questions and Answers:

Campbell Hausfeld FP202800 Specifications

General IconGeneral
ModelFP202800
Max Pressure125 PSI
Power SourceElectric
Voltage120V
Tank Capacity3 Gallons
Maximum Pressure125 psi

Summary

Product Description and Initial Steps

Description of Oilless Compressors

Overview of oilless compressors for DIY home and automotive jobs.

Unpacking and Initial Checks

Instructions for inspecting the unit after unpacking and contacting customer assistance.

Safety Information and Warnings

Safety Guidelines and Symbols

Explains safety symbols (DANGER, WARNING, CAUTION, NOTICE) and their meanings.

Breathable Air Warning

Warning about using the compressor for breathing air without proper filtration equipment.

Warranty Disclaimer

Disclaimer of liability if used for breathing air without proper safety equipment.

General Safety Precautions

California Proposition 65 Warning

Warning about potential cancer and reproductive harm from chemicals in the product.

Operational Safety Rules

Essential safety rules for operating the air compressor system.

Electrical, Motor, and Tank Safety

Warnings about electrical hazards, hot parts, and tank pressure safety.

Spraying Safety Precautions

Safety guidelines for spraying flammable materials or using solvents.

Component Overview and Installation

Pressure Switch, Regulator, and Gauges

Explanation of pressure switch, regulator adjustment, and gauge readings.

Safety Valve and Drain Valve

Purpose of the safety valve for pressure release and drain valve for moisture removal.

Installation Location Requirements

Guidelines for selecting a clean, ventilated area for compressor placement.

Grounding Instructions

Essential steps and precautions for properly grounding the compressor.

Operation Procedures and Safety

Grounding and Wiring Safety

Warnings about improper grounding, wiring, and potential overheating.

Lubrication (Oilless)

States that the product is oilless and does not require lubrication.

Break-In and Start-Up

Step-by-step procedures for breaking in and starting the compressor.

Compressor Operation and Moisture

Explanation of ON/OFF cycling, gauge readings, and air moisture.

Maintenance and Storage

Maintenance Safety and Valve Check

Safety warning for maintenance and procedure to check the safety valve.

Tank Draining, Cleaning, and Overload Protector

Instructions for draining, cleaning, and understanding the overload protector.

Storage and Technical Service

Proper storage procedures and contact information for technical assistance.

Maintenance Schedule

Recommended daily, weekly, and monthly maintenance tasks.

Troubleshooting

Compressor Failure to Start

Possible causes and corrective actions when the compressor fails to start.

Overload, Pressure, and Performance Issues

Troubleshooting repeated thermal overload, tank pressure drops, and low output.

Moisture and Safety Valve Problems

Diagnosing excess moisture and safety valve malfunctions.

Parts and Service

Parts Identification and Diagrams

Exploded view and list of compressor parts with reference numbers.

Repair Kits and Accessories

List of available repair kits and accessories for the compressor.

Limited Warranty

Warranty Coverage, Exclusions, and Responsibilities

Details coverage, exclusions, purchaser, and warrantor responsibilities.

Legal Rights and Applicability

Information on legal rights granted by the warranty and its geographical applicability.

Related product manuals