Table of Contents
1. Getting started 1
2. USB communications 2
3. Cellular communications option 4
3.1 Pre-installation 5
3.1.1 Establish cellular service 5
3.1.1.1 Selecting a data service 5
3.1.2 Install the SIM card 6
3.1.3 Konect PakBus Router setup 6
3.1.3.1 Get started 6
3.1.3.2 Set up Konect PakBus Router 7
3.2 Installation 8
3.2.1 Modules using Konect PakBus Router (private dynamic IP) 8
3.2.1.1 Configure data logger 8
3.2.1.2 Set up LoggerNet 10
3.2.1.3 Test the connection 12
3.3 Cellular (TX/RX) LED Indicator 13
3.4 Signal strength and quality 13
3.4.1 Signal strength 14
3.4.2 Signal quality 14
4. Creating a Short Cut data logger program 16
5. Sending a program to the data logger 20
6. Working with data 22
6.1 Default data tables 22
6.2 Collecting data 23
6.2.1 Collecting data using LoggerNet 23
6.2.2 Collecting data using PC400 24
6.3 Viewing historic data 24
Table of Contents - i
To Next Page
Loading...
