Campbell CR300 series - Collecting Data; Collecting Data Using Loggernet

6.2 Collecting data
The data logger writes to data tables based on intervals and conditions set in the CRBasic
program. After the program has been running for enough time to generate data records, data
may be collected by using data logger support software. During data collection, data is copied to
the computer and still remains on the data logger. Collections may be done manually, or
automatically through scheduled collections set in LoggerNet Setup. Use these instruction or
follow the Collect Data Tutorial .
6.2.1 Collecting data using LoggerNet
1.
From the LoggerNet toolbar, click Main and Connect , select the data logger from the
Stations list, then Connect .
2.
Click Collect Now .
3. After the data is collected, the Data Collection Results window displays the tables collected
and where they are stored on the computer.
4. Select a data file, then View File to view the data. See Viewing historic data(p. 24)
6. Working with data23