CR300-Series Datalogger
16
Select the Collect Data tab.
Select an option in What to Collect.
• New data from datalogger
(Append to data files) –
collects only the data stored
since the last data collection
and appends this data to the
end of the existing file.
• All data from datalogger
(Overwrite data files) – collects
all of the data in the selected
table and replaces the existing
file.
• Both options create a new file
if one does not exist yet.
In the Table list, select the data
table(s) to collect. When they are
collected, they will be written to the
location given in the File Name
Click Start Data Collection.
After PC200W or PC400 collects
the data, a window titled Data
Collection Results opens. Among
other information, this window
shows the tables collected and
where the tables are now stored on
the computer.
To immediately view data, click
View File. This opens View Pro,
which shows the entire data file. See
Section 4.7, View Data (p. 18).
Collect new data from the OneMin table.
To Next Page
Loading...
