•
PT Hub!
•
Motorized Tripod Head (MP-360, Bescor, or Hague)!
•
USB cable for camera connection!
•
Serial Cable (included with PT Hub)!
•
USB A to B cable (included with PT Hub)!
•
Camera!
•
Mobile Device (iOS/Android)!
•
Connect the CamRanger Mini, PT Hub, tripod head, and camera as shown in the above
diagram.!
•
Set the tripod head power switch to “M” to turn on the tripod head!
•
Setup and start the rest of the equipment as normally done!
App Additions with the PT Hub and Tripod Head
To Next Page
Loading...