EasyManua.ls Logo

Can-Am Spyder RT - Brakes

Can-Am Spyder RT
195 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE PROCEDURES
rmo2008-001-041_a
TIRE TREAD WEAR
1. Tread-wear limit indicator
A. Appropriate tread depth
B. Minimum tread depth, replace tire
It is normal to see uneven wear on tires
depending on how the vehicle is driven
and road conditions. The front tires
external or internal edges and the rear
tire center tread will wear unevenly
depending on if the vehicle is driven
smoothly or aggressively.
Tire Rotation (Front)
Rotate front tires when tread depth
reaches 4 mm (5/32 in). This will maxi-
mize tire life.
WARNING
The tires a re designed to rotate
only in one direction. Do not
switch the left and right front
wheels . The tires m ust be dis-
mounted from the wheels for tire
rotation. If a tire is mounted on the
incorrect side, you will have less
traction and could lose control.
CAUTION Do not hold the front
wheel spoke while attempting to
spin the front wheel as your fingers
may be caught between the wheel
and the brake caliper.
Tire Registration Form
Intheeventofatirerecall,wecanonly
contact you if we have your name and
address. As a vehicle manufacturer,
BRP keeps a record of the Tire Identi-
fication Number (TIN) associated with
the Vehicle Identification Nu m b er (VIN)
(see
VEHICLE IDENTIFICATION
)and
its current owner information.
If you replace any tire on your vehi-
cle, a "Tire Registration Form" must be
completedandsenttothetiremanu-
facturer consumer service group. The
“Tire Registration Form” is available at
an authorized Can-Am roadster dealer.
Brakes
WARNING
New brakes will not o perate at
their maximum efficiency until
their break-in is completed. Brak-
ing performance may be reduced,
so use extra caution. Brakes take
about300km(200mi)ofriding
with frequent braking to break-in.
For riding with infrequent braking,
allow extra time to break-in the
brakes.
Brake Fluid Level Verification
Use only D OT 4 brake fluid from a
sealed container.
Check the brake fluid level as follows:
1. Parkthevehicleonafirm,levelsur-
face.
2. Unla tch and lift the seat
OPENING
THE SEAT
.
rmo2010-001-013_b
TYPICAL
1. Brake fluid reservoir
134
______________

Table of Contents

Related product manuals