Why is there no chlorine/bromine reading in my Canadian Spa Toronto SE SPA KH-10047?
If you have no chlorine/bromine reading in your Canadian Spa Hot Tub, it could be due to a high concentration of organic contaminants using up the sanitizers. In this case, add Granular Chlorine. Also, the test trips may be ineffective, so replace them at least once a year and keep them cool and out of sunlight.
What to do if I have eye/skin irritation from my Canadian Spa Toronto SE SPA KH-10047 Hot Tub?
Eye or skin irritation in your Canadian Spa Hot Tub is often caused by combined chlorine due to a high concentration of organic contaminants. To resolve this, shock the water with Granular Chlorine and add a disinfectant.
How to fix cloudy water in my Canadian Spa Toronto SE SPA KH-10047?
Cloudy water in your Canadian Spa Hot Tub can result from several issues: * Nic contaminants build-up: use shock treatment with Granular Chlorine. * Suspended particles: add Granular Chlorine and use a SPA-BALL. * High pH: add pH DOWN until the pH level reads 7.2–7.6. * High total alkalinity: add pH DOWN and adjust the total alkalinity to 80–150 p.p.m. * Dirty filter: replace the filter. * Dissolved solids: empty the spa and refill it.
How to get rid of odour in my Canadian Spa Hot Tub?
Odour in your Canadian Spa Hot Tub is likely caused by a high level of organic contaminants. To fix it, shock the water with Granular Chlorine.
General| Water Capacity | 400 gallons |
|---|---|
| Heater | 5.5 kW |
| Seating Capacity | 6 persons |
| Jet Count | 44 jets |
| Insulation | Full foam |
| Pump | 2 x 5.0 HP |
To Next Page
