What to do if my Canadian Spa Hot Tub water is cloudy?
If the water in your Canadian Spa Hot Tub is cloudy, you can try several solutions: perform a shock treatment with Granular Chlorine, add Granular Chlorine and use a SPA-BALL, add pH DOWN until the pH level reads 7.2–7.6, add pH DOWN and adjust total alkalinity to 80–150 p.p.m., replace the filter, or empty the spa and refill it.
Why does my Canadian Spa GS Hot Tub have an odour?
The odour in your Canadian Spa Hot Tub is likely due to a high level of organic contaminants combined with chlorine. To resolve this, shock the water with Granular Chlorine.
What causes eye or skin irritation in my Canadian Spa GS Hot Tub?
Eye or skin irritation in your Canadian Spa Hot Tub can be caused by: * pH being too low. * combined chlorine due to a high concentration of organic contaminants. To address this, add pH up until the level is 7.2–7.6, or shock the water with Granular Chlorine and add a disinfectant.
What to do if my Canadian Spa GS has scale deposits?
Scale deposits in your Canadian Spa Hot Tub are caused by high calcium levels, high pH, and high alkalinity. To fix this, partially drain the hot tub, add Granular Chlorine, and correct the pH level to 7.2–7.6 and alkalinity to 80–150 p.p.m.
Why is my Canadian Spa GS Hot Tub foaming?
Foaming in your Canadian Spa Hot Tub is usually due to a high concentration of oils and organic contaminants. To fix this, squirt FOAM-FREE on the foam and use the SPA-BALL.
What to do if there is no chlorine or bromine reading in my Canadian Spa GS?
A lack of chlorine or bromine reading in your Canadian Spa Hot Tub can be due to: 1. a high concentration of organic contaminants using up sanitizers; add Granular Chlorine to resolve this. 2. test strips may be ineffective; replace them at least once a year and keep them cool and out of sunlight.
What to do if my Canadian Spa Hot Tub water is coloured?
If your Canadian Spa Hot Tub water is coloured, use Chlorine Granules.
Why does my Canadian Spa GS Hot Tub have cloudy water?
Cloudy water in your Canadian Spa Hot Tub can result from several factors. It may be due to a build-up of organic contaminants, in which case you should apply a shock treatment using Granular Chlorine. Alternatively, the cloudiness could be due to suspended particles; add Granular Chlorine and use a SPA-BALL. High pH or total alkalinity levels can also cause cloudy water, so add pH DOWN until the pH level reads 7.2–7.6, and adjust the total alkalinity to 80–150 p.p.m. A dirty filter may also be the culprit, so replace the filter. Finally, dissolved solids can cause this issue, requiring you to empty and refill the spa.
What to do if there is eye or skin irritation using Canadian Spa GS?
If you experience eye or skin irritation while using your Canadian Spa Hot Tub, it may be due to a high concentration of organic contaminants depleting the sanitizers. Shock the water with Granular Chlorine and add disinfectant.
How to get rid of odour in Canadian Spa GS Hot Tub?
To eliminate odors in your Canadian Spa Hot Tub, shock the water with Granular Chlorine. The odor is likely caused by a high level of organic contaminants combined with chlorine.
General| Brand | Canadian Spa |
|---|---|
| Model | GS Series |
| Category | Hot Tub |
| Language | English |
To Next Page