Need help?Do you have a question about the Canadian Spa Rio Grande and is the answer not in the manual?
General| Control System | Balboa |
|---|---|
| Voltage | 240V |
| Amperage | 50A |
| Lighting | LED |
| Shell Material | Acrylic |
| Warranty | 5 years |
Basic safety precautions for installing and using electrical spa equipment, including warnings about shock, children, and cord damage.
Consulting a doctor before spa use, especially regarding alcohol, drugs, medication, pre-existing conditions, obesity, and pregnancy.
Cautions regarding slippery areas, avoiding external switching devices, and not using the spa after strenuous exercise.
Warranty against defects in vinyl finish, blistering, cracking, or delamination for one year.
Warranty ensuring plumbing remains free from leaks for one year from the purchase date.
Warranty for the equipment pack (pump, blower, heater, control system) against malfunction for one year.
Details on warranty applicability, transferability, exclusions, and voidance conditions for residential use.
Includes Foam Walls (x8) and Foam Caps (x8) for spa assembly.
The main control unit for the spa's functions.
Includes Bottom Liner and Top Liner for the spa structure.
The inflatable cover for the spa.
Includes Inlet/Outlet Caps (x3) and Connectors for water flow management.
Filter Cartridges (x2) for water purification.
Includes Drain Hose, Inflation Hose, Secondary Intake Hose, and L & T Connectors.
Unit for adding aromatherapy scents to the spa experience.
Detailed specifications for the Swift Current spa model, including seating, dimensions, and power requirements.
Detailed specifications for the Rio Grande spa model, including seating, dimensions, and power requirements.
Diagram and description of the Portable Control Unit (PCU) and its display and buttons.
Explains LED display, temperature adjustment, mode changes, jet activation, and lock functions.
Instructions on choosing a level, clear location with adequate support for the spa.
Procedure for testing the GFCI plug and inflating the spa lid.
Step-by-step guide for assembling the spa's foam panels and liners.
Instructions for connecting the PCU to the spa and its components.
Guide on how to install the filter cartridge into the housing.
Ensuring connections are closed, filling the spa, and purging air from the PCU.
Instructions for placing the thermal blanket for heat retention.
How to lock the PCU buttons to prevent unintended changes.
Guidelines for cleaning and replacing the filter cartridge.
Recommendations for maintaining water chemistry, PH, chlorine, and alkalinity.
Instructions for cleaning the spa interior and changing the water.
Procedure for inserting aromatherapy beads and activating scents.
Steps for draining the spa water using the drain hose.
How to properly dry the spa and Portable Control Unit before storage.
Advice on storing the spa in a warm, dry place, preferably in original packaging.
Troubleshooting for sensor, high heat, freezing, and overheat errors.
Resolving issues related to blocked inlets/outlets and heater dry errors.
Information on the filter change reminder ('CHG FIL') and massage pump indicator ('BUB').
Verifying correct water level and ensuring inside connection caps are removed.
Procedures for bleeding air from the PCU and checking for obstructions.
Ensuring the filter is clean and connectors are not kinked.
Instructions for performing a back flush on the PCU for maintenance.
Troubleshooting for pump not operating or not heating properly, including GFCI and water level checks.
Solutions for jet system malfunctions and water filtration issues.
Addressing PCU leaks, water clarity, and improper chemical treatment issues.
Troubleshooting red light blinking and leaks from the spa liner or connectors.
Information on purchasing additional filter cartridges.
Details on the portable chemical kit for water balance and the booster seat.
Includes Round Cover Cap, Hard Top Cover, and Cradle Cover Lifter.
Accessories like Aromatherapy Beads, Headrest & Cup Holder Set, and Spa Surround Furniture.
To Next Page
