C&K systems LED Keypad - Central Station Test

27
If the test message was successfully transmitted to
the central station, the keypad will beep twice.
CENTRAL STATION TEST
This option tests the reporting capability of your system by sending a test
message to the central station. Weekends are the best time for the CENTRAL
STATION TEST. To schedule one, call our central station at:
OPTION
INSTALLED
CENTRAL STATION
Enter your PIN (if required),
push the key, enter the digit "6",
the digit "1", then push the # key.
6 1
PIN
REQUIRED
.
If the test message was not successfully transmitted to the central station, the
keypad will beep five times, and the SERVICE light will flash fast. Call our Service
Department for assistance.
.
To initiate the CENTRAL STATION TEST: