12
HOME ARMING
Home Arming arms perimeter zones, while bypassing interior zones.
Make sure that the display reads READY TO ARM.
Enter your PIN (if required),
push the key, enter the digit "4",
then push the # key.
PIN
REQUIRED
.
The keypad will beep twice to confirm that the system is armed,
and the display will read ARMED.
The red ARM light will flash while the system is armed.
.
Exit Delay Disable (see page 19).
.
Home Arming allows you to move about freely inside the premises while the system is
armed.
.
When the system is Home Armed, you can enter the premises without setting off an
alarm through a delayed entry zone. (Don't forget to disarm the system after entry!)
.
OPTION
INSTALLED
4
#
*
*
To Next Page
Loading...
