C&K systems System 236 - CHANGING A USER PIN - SYSTEM 236, 236 i, 2316, & 2316 i

29
User 1 can use his Master PIN to change the PINs of Users 1 - 6 (on System
236 and 236i) or Users 1 - 32 (on System 2316 and 2316i).
CHANGING A USER PIN - SYSTEM 236, 236i, 2316, & 2316i
Enter your Master PIN, push
the key, enter the digit "0", then
push the # key.
MASTER PIN
REQUIRED
0
#
*
*
System: 236, 236i ,2316, 2316i ONLY
Enter the User number and push the # key.
USER NUMBER
#
The display will read PROGRAMMING.
.
Enter User number 1 - 6 for System 236/236i.
Enter User number 1 - 32 for System 2316/2316i. (See Note below.)
.
.
Enter the new PIN and push
the # key.
#
The new PIN must be four digits long for System 236/236i.
.
The new PIN can be from two to five digits long for System 2316/2316i.
.
NOTE: On System 2316i, User Code #32 is reserved for special functions using the
Optional Relay Output Module.