C&K systems System 236 - After an alarm

21
AFTER AN ALARM OCCURS:
Enter your PIN and push the
# key.
This will silence the bell/siren and disarm the system.
.
The display will read ALARM ZONE. To see which zones are in alarm, push the # key.
.
If this is a false alarm and no emergency response is needed, call
our central station IMMEDIATELY at to
cancel the alarm.
Write down the number of the triggered zones to help us service you.
.
Clear the alarm memory and the display
by pushing the key, entering the digit "1",
then pushing the # key.
PIN
REQUIRED
#
*
1
#
*