EN-12
2.
Touch timer control, the minder indicator starts
flashing and “10” is shown in the timer display.
3.
Set the time by touching the “-” or “+” control of
the timer.
Hint: Touch either the “-” or “+” control of the timer
once, time decreases or increases by 1 minute.
Touch and hold either the “-” or “+” control of
the timer, time decreases or increases by
10 minutes.
If the setting time exceeds 99 minutes, the timer
will automatically return to 00 minute.
4.
Touching the “-” and “+” together, the timer is cancelled, and the “00”
will be shown on the minute display.
5.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for
5 seconds.
NOTE: The red dot next to power level indicator
lights up indicating that zone is selected.
To Next Page
Loading...
