Candy CDP 2L949W User Manual

8
LOADING THE RINSE AID
The rinse aid
The rinse aid, which is automatically released during the last rinsing cycle, helps the dishes to dry quickly and
prevents spots and stains forming.
Filling the rinse aid container
The rinse aid container can be found to the left of the detergent container (fig. A "3").To open the lid, push the
reference mark and, in the same time, pull the tab of opening.It is always advisable to use rinse aid that is specifically
designed for dishwasher.Check the rinse aid level through the indicator eye (C) which is located on the dispenser.
Regulating the rinse aid from 1 to 6
The regulator (D) is placed under the lid and can be turned using a coin.The recommended position is 4.The
limestone content of the water considerably affects the formation of limescale and the drying performance.
It is therefore important to regulate the quantity of rinse aid to achieve good washing results.If, after the wash,
streaks occur on the dishes, decrease the amount by one position. If whitish spots occur, increase the amount
by one position.

Candy CDP 2L949W Specifications

General

Door color	White
Control type	Buttons
Product size	Slimline (45 cm)
Built-in display	No
Appliance placement	Freestanding
Upper basket adjustable height	Yes
Cycle time	205 min
Noise level	49 dB
Drying system	Condensation
Delay start (max)	24 h
Dishwashing programs	-
Number of place settings	9 place settings
Number of washing programs	5
Drying class	A
Annual water consumption	2520 L
Annual energy consumption	197 kWh
Current	10 A
AC input voltage	230 V
Water consumption per cycle	9 L
Energy consumption per cycle	0.69 kWh
Package weight	42350 g

Weight and Dimensions

Depth	580 mm
Width	450 mm
Height	820 mm
Weight	38410 g