What to do if my Candy Dishwasher shows ERROR E3?
If your Candy dishwasher displays error code E3 and emits a short audio signal, it indicates that the dishwasher is not draining water. To resolve this, ensure that the drain pipe is not bent, trapped, or blocked, and that the filter is not clogged. Additionally, verify that the siphon is not clogged.
What to do if my Candy Dishwasher shows ERROR E4?
If your Candy dishwasher displays error code E4 and emits a short audio signal, this indicates a water leak. Ensure that the drain pipe isn’t bent, trapped, or blocked and that the filter is not clogged. Also, make sure the siphon is not clogged.
What to do if my Candy Dishwasher shows ERROR E21?
If your Candy dishwasher displays error code E21 and emits a short audio signal, this indicates an uncontrolled water supply due to an open solenoid valve. Immediately close the water tap and disconnect the appliance from the power supply.
What does ERROR E8 mean on my Candy Dishwasher?
If your Candy dishwasher displays error code E8 and emits a short audio signal, it means that the water heating element is not working correctly or the filter plate is clogged. Clean the filter plate to resolve this issue.
What does ERROR E18 mean on my Candy Dishwasher?
If your Candy dishwasher displays error code E18 and emits a short audio signal, it indicates water level problems, possibly due to a clogged filter plate. Clean the filter plate to resolve this.
How to fix a Candy CF 3E9L0W-80 Dishwasher when no program works?
If no program works on your Candy dishwasher, check if the plug is properly connected to the wall socket and press the O/I button. Ensure the door is closed, there is electricity supply, and the water tap is open. Also, make sure the water supply hose is not bent.
Why are my dishes only partially washed in my Candy CF 3E9L0W-80?
If the dishes in your Candy dishwasher are only partially washed, several factors could be at play. Ensure the dishes are not placed too close together and that the spray arms are not blocked. If the bottom of saucepans are not being washed well, soak burnt-on food remains before loading. Reposition saucepans if the edges are not being cleaned properly. The end of the drain pipe must not come into contact with the outflow water. Increase the amount of detergent if necessary, or change to a new detergent. For vigorous cleaning, select a more intense wash program. Make sure the salt container cap is tightened properly.
How to fix Candy CF 3E9L0W-80 that does not discharge water?
If your Candy dishwasher is not discharging water, clean the filter. If the drain pipe is bent, eliminate the bends. Ensure the drain pipe extension is correctly connected according to the instructions.
Why are the spray arms not rotating in my Candy Dishwasher?
If the spray arms in your Candy dishwasher are not rotating, it could be due to several reasons. You might be using an excessive amount of detergent or the detergent may not be suitable. An item may be preventing the arms from rotating. The filtering plate and filter might be very dirty, so clean the filtering plate and filter.
Why does my Candy CF 3E9L0W-80 Dishwasher discharge water continuously?
If your Candy dishwasher discharges water continuously, it is because the position of the drain pipe is too low. Lift the drain pipe to at least 40 cm above the floor level.
General| Type | Freestanding |
|---|---|
| Energy Efficiency Class | E |
| Noise Level | 49 dB |
| Programs | 6 |
| Height | 85 cm |
| Width | 60 cm |
| Depth | 60 cm |
| Control Type | Electronic |
| Drying Class | A |
| Delay Start | Yes |
| Half Load Option | Yes |
Instructions for installing the dishwasher, safety warnings, and inlet hose replacement procedures.
Details on overflow, WATERBLOCK, and AQUASTOP safety devices for appliance protection.
Guidance on connecting the dishwasher's outlet hose to drainage systems and standpipes.
How to fill the salt container, initial startup, and maintenance reminders.
Explains different methods for adjusting the upper basket height based on model type.
Guidance on loading cups, glasses, and long utensils into the upper basket.
Instructions for loading pots, pans, plates, and other items into the lower basket.
Details on loading large plates (Maxi Plates) and cutlery.
Information on the POWER WASH program and its optimal usage for heavily soiled items.
How to fill and use the detergent dispenser, including pre-wash detergent addition.
Information on detergent tablets, concentrated, and combined detergents, and their effects.
How to fill the rinse aid container and adjust its dosage for optimal drying.
Explains the filter system components and the process for cleaning them.
Advice for achieving better washing and drying results by proper loading and pre-treatment.
Tips for saving energy, water, and avoiding damage to dishes and the appliance.
Procedures for cleaning the dishwasher's exterior surfaces and interior tank.
Instructions on how to remove and clean the spray arms on the rotor arms.
Actions to take after a wash cycle and for extended non-use of the appliance.
Identifies and explains the functions of control panel buttons and indicator lights.
Specifications for the dishwasher's dimensions, load capacity, and place settings.
Details on water pressure, fuse, power input, and supply voltage.
How to select, interrupt, and change wash programs during operation.
Explains special options like Half Load, Tablets, and the No Salt indicator light.
Instructions for setting delayed start and accessing the appliance settings menu.
How to activate and deactivate the child lock function to prevent accidental changes.
Steps for pairing the dishwasher with the Wi-Fi app and initial setup.
How to enable, disable, and interpret Wi-Fi indicator status for remote control.
Details on available wash programs, their icons, and general purposes.
Information on program options like Delay Start, Tablets, and Half Load usage.
How to adjust the water softener based on water hardness levels.
Details on the process and frequency of resin regeneration for the water softener.
Lists error codes for display models and their corresponding solutions.
Common operational faults and their recommended solutions.
Identifies specific issues like noise, incomplete drying, and detergent dispensing.
Details on product warranty, service, and contact information for assistance.
Information on the disposal and recycling of waste electrical and electronic equipment.
To Next Page
