Cannondale Slice - Seat Post; Seat Post Installation and Care; Warning: Seat Post Cutting

10
100mm
2
4 Nm, 35InLbs
KP361/
4 mm
6-7 Nm, 53-62 InLbs
1
KP360/
KF115/
SEAT POST
For more information about carbon
fiber seat posts, see also “APPENDIX D.
Care and Maintenance of Carbon Fiber
Seat Posts” in your Cannondale Bicycle
Owner’s Manual.
WARNING
THE SEAT POST MUST ONLY BE CUT
BY A PROFESSIONAL BIKE MECHANIC.
Incorrectly cutting the seat post can result
in damage leading to an accident.
Please Note:
■ The seatpost MINIMUM INSERT depth is
100mm.
■ The frame INSERT LIMIT varies with
frame size.
■ Periodically, remove the seat post and
grease the bolt threads, washer and
wedge faces with standard bike grease
(avoid applying carbon gel to these
areas).
■ Apply carbon gel inside the seat tube
and on the seat post before inserting the
seatpost.
INSERT LIMIT
* The SLICE MS seat post has two
positions (1,2) for mounting the saddle.
A full range of angles from 77 to 81
degrees is achievable depending on the
rider’s preference and/or the event.
EN