Cannondale Slice - Technical Information; Geometry and Specifications

5
M
K
G
E
C
I
H
D
L
F
B
A
O
NJ
teCHnICAL InFoRMAtIon
GEOMETRY / SPECIFICATIONS
SIZE 44 48 51 54 57 60
A HORIZONTAL TOP TUBE LENGTH (CM) 45.0 47.0 48.9 50.7 52.6 54.5
B MEASURED SIZE (CM)* 46 48.6 50.3 52.4 54.4 56.5
C SEAT TUBE ANGLE (DEGREES) 79°
h h h h h
D HEAD TUBE ANGLE (DEGREES) 71.2°
h h
71.5° 72° 72.5°
E CHAIN STAY LENGTH (CM) 38.0 40.5
h h h h
F FORK RAKE (CM) 3.5 4.5
h h h h
G BOTTOM BRACKET HEIGHT (CM) 25.9 26.2
h h h h
H WHEELBASE (CM) 91.3 96.0 98.1 100.0 101.7 103.4
I TRAIL (CM) 6.9 6.8 6.8 6.6 6.3 6.0
J
STANDOVER AT TOP TUBE MIDPOINT (CM) 71.1 73.9 75.6 7 7.7 79.7 81.7
K BOTTOM BRACKET DROP (CM) 5.3 7.7
h h h h
L FRONT CENTER DISTANCE (CM) 53.7 56. 3 58.3 60.2 61.9 63.6
M HEAD TUBE LENGTH (CM) 10.0 8.0 9.8 11.8 13.7 15.6
N STACK (CM)** 46.5 48.7 50.7 52.7 54.7 56.7
O REACH (CM) 36.0 37.5 39.0 40.5 42.0 43.5
HEADTUBE 1 1/8”
BB SHELL/ WIDTH BB30A / 73mm
SEAT POST KP360/
FRONT DERAILLEUR Direct Mount
DROPOUT SPACING 130mm
REAR BRAKE Direct Mount Rim Brakes
INTENDED USE ASTM CONDITION 1, High-Performance Road
Maximum Weight Limit (Lbs/Kg) *(Seat Bag Only)
RIDER LUGGAGE* TOTAL
300 / 136 5 / 2.3 305 / 138
* THE SLICE SEAT POST HAS TWO POSITIONS FOR MOUNTING THE SADDLE. A FULL RANGE OF ANGLES FROM 77 TO 81 DEGREES IS ACHIEVABLE DEPENDING ON THE RIDER’S
PREFERENCE AND/OR THE EVENT.